Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › FRONT SPEED SENSOR › 2011.08–2017.01
RM19S0E _54 Brake _051475 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0248230 FRONT SPEED SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  FRONT SPEED SENSOR  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 53876A 2.REMOVE FRONT FENDER LINER

C234705

a.

Remove the 7 clips, 2 screws and 4 grommets and remove the front fender liner.

HINT:

The grommet needs to be replaced with a new one because it will break when it is removed.



Hide 89543 3.REMOVE FRONT SPEED SENSOR

C234706E05
1.896,2.375 2.188,2.313 false 5.792,1.604 5.646,1.698 false 5.229,0.646 5.438,0.719 false 2.229,2.219 2.448,2.406 0.219,0.188 10 true *1 5.823,1.479 5.979,1.656 0.156,0.177 10 true *2 5.469,0.646 5.625,0.823 0.156,0.177 10 false *3

a.

Disengage the clamp from the body.

Text in Illustration
*1 No. 1 Clamp *2 No. 2 Clamp
*3 No. 3 Clamp - -


b.

Disconnect the speed sensor connector.


c.

Remove the No. 3 clamp from the body.


d.

Disengage the 2 clamps from the body.


e.

Remove the bolt and separate the No. 2 clamp from the body.


f.

Remove the bolt and separate the No. 1 clamp from the shock absorber.


g.

Remove the bolt and remove the speed sensor from the steering knuckle.

NOTICE:
·

Keep the speed sensor tip and installation portion free of foreign matter.

·

Remove the speed sensor without turning it from its original installation angle.