Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE LINE
RM19S0E _54 Brake _051476 BRAKE SYSTEM (OTHER) _0248239 BRAKE LINE L

BRAKE SYSTEM (OTHER)  BRAKE LINE  PRECAUTION  


TROUBLESHOOTING PRECAUTION



NOTICE:
·

Since the brake lines are classified as critical safety related parts, be sure to disassemble and inspect the components if a brake fluid leak is found. If any abnormality is found, replace the component with a new one.

·

When removing brake components, cover the brake line connections to prevent foreign matter such as dust or dirt from entering the lines.

·

Do not damage or deform the brake lines when removing or installing them.

·

When installing a grommet to the body, ensure that the brake line passes through the center of the grommet.

·

When installing a brake line or flexible hose, ensure that they are free from twists or bends.

·

If the cap of a flexible hose does not match the groove on the bracket, twist the hose slightly to insert it.

·

Flexible hoses must be free from shock absorber oil, grease, etc.

·

When installing a brake line to a plastic clamp, ensure that the brake line is not loose or pinched.

·

Do not reuse any clips or plastic clamps removed from a flexible hose.

·

After installing a brake line or flexible hose, ensure that they do not interfere with any other components.

·
C102779E38
0.958,1.406 0.958,1.781 false 2.198,3.49 2.198,4.063 false 3,3.063 3,3.51 false 1.688,0.885 1.5,0.552 false 0.094,0.042 0.271,0.219 0.177,0.177 10 false *a 0.094,2.365 0.271,2.542 0.177,0.177 10 false *d 1.292,0.417 1.469,0.594 0.177,0.177 10 false *b 0.875,1.802 1.031,1.979 0.156,0.177 10 false *c 2.115,4.063 2.271,4.24 0.156,0.177 10 false *c 2.917,3.542 3.073,3.719 0.156,0.177 10 false *b

When disconnecting and connecting a flexible hose and brake line:

Text in Illustration
*a Disconnecting
*b Turn
*c Hold
*d Connecting

(a)

Hold the flexible hose with a wrench and disconnect the brake line with a union nut wrench without deforming the line.

(b)

Remove the clip.

(c)

Install a new clip.

(d)

Connect the brake line with a union nut wrench without deforming the line.


·
C219569E04
2.042,0.583 2.177,0.417 false 0.844,1.125 0.708,0.958 false 1.469,2.635 1.229,2.635 false 2.146,0.26 2.313,0.427 0.167,0.167 10 false *a 0.552,0.792 0.719,0.958 0.167,0.167 10 false *b 1.031,2.563 1.188,2.719 0.156,0.156 10 false *1

When connecting a brake line and way:

Text in Illustration
*1 Way
*a Turn
*b Hold

(a)

Support the way to prevent deformation of the brake line and connect the brake line to the way with a union nut wrench.

(b)

Support the way to prevent deformation of the brake line and install the bolt to secure the way to the body.