Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER(for LHD)
RM19S0E _54 Brake _051476 BRAKE SYSTEM (OTHER) _0248241 BRAKE MASTER CYLINDER(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(for LHD)  DISASSEMBLY  


PROCEDURE

Hide 47202 1.REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

a.
C234469

Fix the brake master cylinder in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.

Using a pin punch 5 mm and a hammer, tap out the straight pin and remove the brake master cylinder reservoir sub-assembly.


c.

Remove the 2 grommets from the master cylinder reservoir sub-assembly.


Hide 47230 2.REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

Hide 47299 3.REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER