Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER(for LHD)
RM19S0E _54 Brake _051476 BRAKE SYSTEM (OTHER) _0248241 BRAKE MASTER CYLINDER(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(for LHD)  REASSEMBLY  


PROCEDURE

Hide 47299 1.INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

Hide 47230 2.INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

Hide 47202 3.INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

a.

Apply lithium soap base glycol grease to 2 new grommets.


b.

Install the 2 grommets onto the brake master cylinder reservoir sub-assembly.


c.

Install the brake master cylinder reservoir sub-assembly to the master cylinder body.


d.
C234469

Fix the brake master cylinder in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



e.

Using a pin punch 5 mm and a hammer, tap in the straight pin.