47299
1.INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER
47230
2.INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
47255
3.INSTALL MASTER CYLINDER RESERVOIR GROMMET
Apply lithium soap base glycol grease to 2 new grommets.
Install the 2 grommets onto the brake master cylinder reservoir.
47202
4.INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
Install the brake master cylinder reservoir to the master cylinder body.
Fix the brake master cylinder in a vise between aluminum plates.
Do not overtighten the vise.
Using a pin punch and a hammer, tap in the straight pin.