Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER(for LHD)
RM19S0E _54 Brake _051476 BRAKE SYSTEM (OTHER) _0248243 BRAKE BOOSTER(for LHD) A

BRAKE SYSTEM (OTHER)  BRAKE BOOSTER(for LHD)  REASSEMBLY  


PROCEDURE

Hide 44730 1.INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY

a.

Install the new check valve grommet to the brake booster assembly.


b.

Install the vacuum check valve assembly to the brake booster assembly.


Hide 47264D 2.TEMPORARILY INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS

a.

Install the push rod lock nut and brake master cylinder push rod clevis to the brake booster assembly.

HINT:

Tighten the push rod lock nut after adjusting the brake pedal height.