Home › Brake › BRAKE (FRONT) › FRONT BRAKE
RM19S0E _54 Brake _051477 BRAKE (FRONT) _0248245 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

Immediately wash off any brake fluid that comes into contact with any painted surfaces.


Hide 47313A 3.DISCONNECT FRONT FLEXIBLE HOSE

a.
C234690

Remove the union bolt and gasket and separate the flexible hose from the disc brake cylinder.


Hide 47750 4.REMOVE DISC BRAKE CYLINDER ASSEMBLY

a.
C234691

Hold the slide pin with a wrench, remove the 2 bolts and remove the disc brake cylinder.


Hide 04465 5.REMOVE FRONT DISC BRAKE PAD KIT

a.
C234692

Remove the disc brake pad kit from the disc brake cylinder mounting.


Hide 04945 6.REMOVE FRONT ANTI SQUEAL SHIM KIT

a.
C234653E01
2.385,0.422 2.536,0.567 0.151,0.145 10 *1 1.373,2.572 1.524,2.717 0.151,0.145 10 *4 2.364,0.503 1.516,0.503 1.516,0.503 1.516,0.629 false 2.083,0.929 2.083,0.502 false 1.456,2.561 1.456,2.186 false 0.823,2.201 0.974,2.346 0.151,0.145 10 *2 0.906,2.19 0.906,1.814 false 0.457,1.986 0.607,2.131 0.151,0.145 10 *3 0.539,1.975 0.539,1.599 false 2.389,2.957 2.540,3.101 0.151,0.145 10 *2 2.472,2.946 2.472,2.721 false 2.826,3.086 2.976,3.231 0.151,0.145 10 *3 2.908,3.075 2.908,2.944 false 1.457,2.387 1.796,2.387 false

Remove the No. 1 anti squeal shim and No. 2 anti squeal shim from each brake pad.

Text in Illustration
*1 Pad Wear Indicator Plate
*2 No. 1 Anti Squeal Shim
*3 No. 2 Anti Squeal Shim
*4 Front Disc Brake Pad


b.

Remove the pad wear indicator plate from each brake pad.


Hide 7.REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE

a.
C234693E02
1.542,0.542 1.281,0.531 true 1.281,1.531 1.021,1.521 true 2.323,0.625 2.625,0.417 true 2.104,1.76 2.417,1.854 true 0.813,1.438 1.021,1.615 0.208,0.177 10 true *1 2.417,1.75 2.625,1.927 0.208,0.177 10 true *2 2.646,0.313 2.854,0.49 0.208,0.177 10 false *1 1.083,0.448 1.292,0.625 0.208,0.177 10 true *2

Remove the 4 disc brake pad support plates from the disc brake cylinder mounting.

Text in Illustration
*1 No. 1 Front Disc Brake Pad Support Plate
*2 No. 2 Front Disc Brake Pad Support Plate

NOTICE:

Each pad support plate has a different shape. Be sure to put an identification mark on each pad support plate so that they can be installed in their original position.



Hide 47715A 8.REMOVE FRONT DISC BRAKE CYLINDER SLIDE PIN

a.
C108928E01
0.547,1.572 0.303,1.675 false 0.097,1.612 0.266,1.779 0.170,0.166 10 *2 0.657,0.239 0.413,0.342 false 0.207,0.279 0.376,0.445 0.170,0.166 10 *1

Remove the slide pin (upper) and slide pin (lower) from the disc brake cylinder mounting.

Text in Illustration
*1 Slide Pin (Upper)
*2 Slide Pin (Lower)


Hide 47769 9.REMOVE FRONT DISC BRAKE CYLINDER SLIDE BUSH

a.
C108929E07
2.348,0.978 2.507,1.130 0.159,0.151 10 *1 2.537,1.287 2.703,1.434 0.166,0.147 10 *2 1.405,1.826 1.565,1.977 0.160,0.150 10 *3 2.061,1.338 2.324,1.074 false 2.281,1.541 2.507,1.386 false 1.536,1.643 1.487,1.815 false

Using a screwdriver with its tip wrapped in protective tape, remove the slide bush from the slide pin (lower).

Text in Illustration
*1 Protective Tape
*2 Slide Bush
*3 Slide Pin (Lower)

NOTICE:

Be careful not to damage the slide pin.



Hide 10.REMOVE FRONT DISC BRAKE BUSH DUST BOOT

a.
C108930

Remove the 2 dust boots from the disc brake cylinder mounting.


Hide 47722 11.REMOVE FRONT DISC BRAKE CYLINDER MOUNTING

a.
C108931

Remove the 2 bolts and disc brake cylinder mounting from the steering knuckle.


Hide 43512 12.REMOVE FRONT DISC

a.
C108932E05
1.969,1.365 1.125,1.896 1.125,1.896 2.083,1.438 false 0.938,1.823 1.115,2 0.177,0.177 10 false *a

Place matchmarks on the disc and axle hub and remove the disc.

Text in Illustration
*a Matchmark