Home › Brake › BRAKE (REAR) › REAR BRAKE
RM19S0E _54 Brake _051478 BRAKE (REAR) _0248247 REAR BRAKE A

BRAKE (REAR)  REAR BRAKE  REMOVAL  


PROCEDURE

Hide 58912A 1.REMOVE REAR CONSOLE BOX

Hide 2.REMOVE REAR WHEEL

Hide 3.DRAIN BRAKE FLUID

NOTICE:

Immediately wash off any brake fluid that comes into contact with any painted surfaces.


Hide 4.LOOSEN PARKING BRAKE CABLE

C234723E03
0.783,1.408 0.948,1.561 0.165,0.153 10 *1 2.481,1.557 2.645,1.710 0.165,0.153 10 *2 0.966,1.496 1.469,1.53 false 1.821,1.587 2.481,1.658 false

a.

Loosen the equalizer and lock nut.

Text in Illustration
*1 Parking Brake Equalizer
*2 Lock Nut

NOTICE:

Do not reuse the loosened nut.



Hide 42403 5.REMOVE REAR BRAKE DRUM SUB-ASSEMBLY

a.

Release the parking brake and remove the rear brake drum.

If the rear brake drum cannot be removed easily, perform the following procedure.


b.
C233134E01
2.085,0.525 2.239,0.679 0.154,0.153 10 *1 2.068,0.618 1.848,0.618 1.848,0.618 1.53,1.021 false

Remove the hole plug and insert a screwdriver through the hole into the backing plate, and hold the automatic adjust lever away from the adjuster.

Text in Illustration
*1 Automatic Adjust Lever
V100135

Contract


c.

Using another screwdriver, contract the brake shoe by turning the adjusting bolt.