Home › Brake › PARKING BRAKE › PARKING BRAKE SWITCH
RM19S0E _54 Brake _051479 PARKING BRAKE _0248252 PARKING BRAKE SWITCH G

PARKING BRAKE  PARKING BRAKE SWITCH  INSPECTION  


PROCEDURE

Hide 84550 1.INSPECT PARKING BRAKE SWITCH ASSEMBLY

a.
C230989E01
1.893,0.025 2.15,0.268 0.257,0.243 10 *a 2.348,1.735 2.569,1.921 0.22,0.186 10 1 2.971,1.216 2.474,1.81 false

Measure the resistance between the connector terminal and the nut inside the parking brake switch assembly.

Text in Illustration
*a Component without harness connected
(Parking Brake Switch Assembly)
V100135

ON
V100136

OFF

Standard Resistance
Tester Connection Switch Condition Specified Condition
1 - Switch body Parking brake switch ON
(Switch pin free)
Below 1 Ω
Parking brake switch OFF
(Switch pin pushed in)
10 kΩ or higher

If the value is not as specified, replace the parking brake switch assembly.