Home › Steering › STEERING COLUMN › STEERING WHEEL
RM19S0E _55 Steering _051481 STEERING COLUMN _0248258 STEERING WHEEL G

STEERING COLUMN  STEERING WHEEL  INSPECTION  


PROCEDURE

Hide 1.INSPECT STEERING PAD SWITCH

a.

Inspect the pad switch. (w/o Microphone)

i.

Measure the resistance according to the value(s) in the table below.

U158350E02
1.375,3.115 1.958,3.115 true 0.604,3.844 0.958,3.51 true 4.479,0.844 4.198,0.385 true 4.74,1.073 4.5,1.365 true 4.844,1.063 4.854,1.354 true 4.969,1.063 5.188,1.354 true 0.698,2.271 0.99,2.698 true 1.771,1.927 1.375,2.667 true 0.885,3.104 0.563,3.104 true 0.188,0.156 0.354,0.302 0.167,0.146 10 false *a 2.448,0.875 2.615,1.021 0.167,0.146 10 false *1 4.375,1.375 4.677,1.51 0.302,0.135 10 false EAU 5.135,1.375 5.427,1.521 0.292,0.146 10 false AU1 4.75,1.375 5.042,1.521 0.292,0.146 10 false AU2 4.073,0.219 4.313,0.365 0.24,0.146 10 false HO 5.271,0.781 5.438,0.938 0.167,0.156 10 false z2 2.01,3.042 2.458,3.188 0.448,0.146 10 false SEEK- 0.198,3.042 0.563,3.188 0.365,0.146 10 false VOL- 0.271,3.854 0.74,4.021 0.469,0.167 10 false MODE 0.302,2.167 0.698,2.333 0.396,0.167 10 false VOL+ 1.813,1.813 2.292,1.979 0.479,0.167 10 false SEEK+

Text in Illustration
*1 Terminal B - -
*a Component without harness connected
(Steering Pad Switch Assembly)
- -

Standard Resistance:
Tester Connection Switch Condition Specified Condition
z2-1 (HO) - Terminal B Always Below 2.5 Ω
z2-10 (AU1) - z2-8 (EAU) No switch pushed 95 to 105 kΩ
z2-9 (AU2) - z2-8 (EAU) No switch pushed 95 to 105 kΩ
z2-10 (AU1) - z2-8 (EAU) Volume+ switch: pushed 950 to 1050 Ω
z2-9 (AU2) - z2-8 (EAU) Volume+ switch: pushed 95 to 105 kΩ
z2-10 (AU1) - z2-8 (EAU) Volume- switch: pushed 2955 to 3265 Ω
z2-9 (AU2) - z2-8 (EAU) Volume- switch: pushed 95 to 105 kΩ
z2-10 (AU1) - z2-8 (EAU) Seek+ switch: pushed Below 2.5 Ω
z2-9 (AU2) - z2-8 (EAU) Seek+ switch: pushed 95 to 105 kΩ
z2-10 (AU1) - z2-8 (EAU) Seek- switch: pushed 313 to 345 Ω
z2-9 (AU2) - z2-8 (EAU) Seek- switch: pushed 95 to 105 kΩ
z2-10 (AU1) - z2-8 (EAU) Mode switch: pushed 95 to 105 kΩ
z2-9 (AU2) - z2-8 (EAU) Mode switch: pushed Below 2.5 Ω

If the result is not as specified, replace the steering pad switch assembly.



b.

Inspect the pad switch. (w/ Microphone)

i.

Measure the resistance according to the value(s) in the table below.

U158693E02
1.375,3.115 1.969,3.115 true 0.594,3.906 0.958,3.521 true 0.698,2.25 0.99,2.677 true 1.771,1.917 1.375,2.656 true 6.385,1.969 5.99,2.708 true 0.885,3.104 0.563,3.104 true 6.052,3.198 6.052,4.094 true 4.458,0.823 4.271,0.396 true 4.844,1.052 4.844,1.344 true 4.979,1.052 5.125,1.344 true 4.708,1.052 4.594,1.344 true 0.417,2.073 0.885,2.24 0.469,0.167 10 false VOL+ 0.188,3.031 0.542,3.198 0.354,0.167 10 false VOL- 0.344,3.927 0.792,4.094 0.448,0.167 10 false MODE 0.271,0.188 0.458,0.365 0.188,0.177 10 false *a 1.74,1.729 2.229,1.896 0.49,0.167 10 false SEEK+ 2.021,3.031 2.51,3.198 0.49,0.167 10 false SEEK- 2.448,0.875 2.625,1.042 0.177,0.167 10 false *1 6.396,1.792 7.094,1.958 0.698,0.167 10 false ON HOOK 4.094,0.229 4.333,0.396 0.24,0.167 10 false H0 5.125,1.354 5.427,1.521 0.302,0.167 10 false AU1 4.698,1.354 5,1.521 0.302,0.167 10 false AU2 4.313,1.354 4.615,1.521 0.302,0.167 10 false EAU 5.688,4.115 6.438,4.281 0.75,0.167 10 false OFF HOOK 5.313,0.771 5.479,0.948 0.167,0.177 10 false z2

Text in Illustration
*1 Terminal B - -
*a Component without harness connected
(Steering Pad Switch Assembly)
- -

Standard Resistance:
Tester Connection Switch Condition Specified Condition
z2-1 (HO) - Terminal B Always Below 2.5 Ω
z2-10 (AU1) - z2-8 (EAU) No switch pushed 95 to 105 kΩ
z2-9 (AU2) - z2-8 (EAU) No switch pushed 95 to 105 kΩ
z2-10 (AU1) - z2-8 (EAU) Volume+ switch: pushed 950 to 1050 Ω
z2-9 (AU2) - z2-8 (EAU) Volume+ switch: pushed 95 to 105 kΩ
z2-10 (AU1) - z2-8 (EAU) Volume- switch: pushed 2955 to 3265 Ω
z2-9 (AU2) - z2-8 (EAU) Volume- switch: pushed 95 to 105 kΩ
z2-10 (AU1) - z2-8 (EAU) Seek+ switch: pushed Below 2.5 Ω
z2-9 (AU2) - z2-8 (EAU) Seek+ switch: pushed 95 to 105 kΩ
z2-10 (AU1) - z2-8 (EAU) Seek- switch: pushed 313 to 345 Ω
z2-9 (AU2) - z2-8 (EAU) Seek- switch: pushed 95 to 105 kΩ
z2-10 (AU1) - z2-8 (EAU) On Hook switch: pushed 95 to 105 kΩ
z2-9 (AU2) - z2-8 (EAU) On Hook switch: pushed 313 to 345 Ω
z2-10 (AU1) - z2-8 (EAU) Off Hook switch: pushed 95 to 105 kΩ
z2-9 (AU2) - z2-8 (EAU) Off Hook switch: pushed 950 to 1050 Ω
z2-10 (AU1) - z2-8 (EAU) Mode switch: pushed 95 to 105 kΩ
z2-9 (AU2) - z2-8 (EAU) Mode switch: pushed Below 2.5 Ω

If the result is not as specified, replace the steering pad switch assembly.