Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM19S0E _56 Audio / Visual / Telematics _051483 AUDIO / VIDEO _0248261 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  Cellular Phone cannot Send/Receive  


PROCEDURE

1.CHECK "Bluetooth" SETTINGS
a.

Check if the "Bluetooth" settings are correct.

OK:

"Bluetooth" settings are correct.




OK

2.CHECK CELLULAR PHONE

NG

SET SETTINGS CORRECTLY

2.CHECK CELLULAR PHONE
a.

Check if the cellular phone is "Bluetooth" compatible.

HINT:

Some versions of "Bluetooth" compatible cellular phones may not function.


OK:

The phone is "Bluetooth" compatible.




OK

3.CHECK SETTINGS

NG

END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)

3.CHECK SETTINGS
a.

Check the cellular phone functions.

HINT:

The cellular phone is unable to call when any of the following conditions are met:

·

The cellular phone is locked.

·

The directory is being transferred.

·

The line is crossed.

·

Outside service range.

·

The power is off.

·

The cellular phone is not connected to "Bluetooth" ("BT" is displayed while connected).



OK:

None of the above conditions exist.




OK

4.CHECK CELLULAR PHONE

NG

SET CORRECTLY

4.CHECK CELLULAR PHONE
a.

Check if the cellular phone can make a call.

HINT:

When the battery is low, calls cannot be made or received.


OK:

Cellular phone can make a call.




OK

5.CHECK RECEPTION

NG

REPAIR OR REPLACE CELLULAR PHONE

5.CHECK RECEPTION
a.

Place the cellular phone close to the radio receiver assembly.


b.

Set the cellular phone so that it can receive calls.


c.

Check if the cellular phone has reception according to the radio receiver assembly.

OK:

The cellular phone has reception.




OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPLACE RADIO RECEIVER ASSEMBLY