Home › Audio / Visual / Telematics › AUDIO / VIDEO › FRONT DOOR SPEAKER › from 2014.07
RM19S0E _56 Audio / Visual / Telematics _051483 AUDIO / VIDEO _0248265 FRONT DOOR SPEAKER A

AUDIO / VIDEO  FRONT DOOR SPEAKER  INSTALLATION  


PROCEDURE

Hide 86160 1.INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

a.
E293446E02
0.823,0.604 0.979,0.781 0.156,0.177 10 true 2 1.906,2.104 2.063,2.281 0.156,0.177 10 true 3 2.5,1.042 2.656,1.219 0.156,0.177 10 true 1

Engage the guide and claw to temporarily install the front No. 1 speaker assembly.


b.

Using an air riveter or hand riveter, install the front No. 1 speaker assembly with 3 new strike rivets.

HINT:

Install the new strike rivets in the order shown in the illustration.


NOTICE:
·

Do not touch the cone part of the front No. 1 speaker assembly.

·
E291309E06
1.979,2.292 1.573,1.76 1.573,1.76 1.979,1.281 false 2.115,2.604 2.99,1.875 2.99,1.875 2.135,0.979 false 1.365,1.677 1.677,1.875 0.313,0.198 10 false *a 2.729,0.823 3.042,1.021 0.313,0.198 10 false *b 2.771,2.51 3.083,2.708 0.313,0.198 10 false *c 3.063,1.781 3.375,1.979 0.313,0.198 10 false *1

Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

Text in Illustration
*1 Mandrel
*a Riveter
*b Incorrect
*c Correct

·
E291310E01
1.42,0.193 1.590,0.354 0.170,0.161 10 *a 2.873,0.742 3.043,0.902 0.170,0.161 10 *b 2.873,2.76 3.043,2.921 0.170,0.161 10 *c 2.873,1.758 3.043,1.919 0.170,0.161 10 *b 1.507,1.259 1.677,1.420 0.170,0.161 10 *a 1.496,2.329 1.666,2.489 0.170,0.161 10 *a 1.391,0.284 1.068,0.284 false 1.481,1.354 1.158,1.354 false 1.477,2.423 1.154,2.423 false

Confirm that the rivets are seated properly against the front No. 1 speaker assembly.

Text in Illustration
*a Riveter
*b Incorrect
*c Correct

·

Do not tilt the riveter when installing the rivet onto the front No. 1 speaker assembly.

·

Do not leave any space between the rivet head and front No. 1 speaker assembly.

·
E291311E01
1.356,0.553 1.526,0.713 0.170,0.161 10 *a 2.705,1.011 2.875,1.171 0.170,0.161 10 *b 2.705,2.377 2.875,2.538 0.170,0.161 10 *c 1.351,1.955 1.521,2.115 0.170,0.161 10 *a 1.328,0.642 1.08,0.642 false 1.325,2.052 1.077,2.052 false

Do not leave any space between the front No. 1 speaker assembly and door. Firmly hold the 2 items together while installing the rivet.

Text in Illustration
*a Riveter
*b Incorrect
*c Correct




c.

Connect the connector.


Hide 67601 2.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

Hide 74231 3.INSTALL FRONT ARMREST BASE UPPER PANEL