Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO ANTENNA CORD › 2014.07–2017.10
RM19S0E _56 Audio / Visual / Telematics _051483 AUDIO / VIDEO _0248269 RADIO ANTENNA CORD A

AUDIO / VIDEO  RADIO ANTENNA CORD  REMOVAL  


PROCEDURE

Hide 55302A 1.REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

Hide 55521C 2.REMOVE STEREO OPENING COVER WITH BRACKET (w/o Radio Receiver)

Hide 3.REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Radio Receiver)

Hide 86101 4.REMOVE ANTENNA CORD SUB-ASSEMBLY

a.
E229131E03
0.083,0.094 0.729,0.281 0.646,0.188 12 true for LHD: 0.083,2.51 0.76,2.698 0.677,0.188 12 true for RHD:

Disconnect the connector.


b.

Remove the bolt.


c.

Using a clip remover, disengage the 3 clamps.


d.
E229132E03
0.073,0.094 0.75,0.271 0.677,0.177 12 true for LHD: 0.063,2.448 0.74,2.625 0.677,0.177 12 true for RHD:

Using a clip remover, disengage the 2 clamps and remove the antenna cord.


Hide 5.REMOVE ROOF HEADLINING ASSEMBLY (for 5 Door)

Hide 6.REMOVE ROOF HEADLINING ASSEMBLY (for 3 Door)

Hide 86101J 7.REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

a.

Remove the 12 pieces of tape.

E346176


b.

Remove the antenna cord from the clamp of the rear side rail spacer.