Home › Audio / Visual / Telematics › AUDIO / VIDEO › STEERING PAD SWITCH › 2011.08–2014.07
RM19S0E _56 Audio / Visual / Telematics _051483 AUDIO / VIDEO _0248272 STEERING PAD SWITCH G

AUDIO / VIDEO  STEERING PAD SWITCH  INSPECTION  


PROCEDURE

Hide 84250A 1.INSPECT STEERING PAD SWITCH ASSEMBLY (w/o Microphone)

a.

Measure the resistance according to the value(s) in the table below.

C233656E08
1.375,3.115 1.958,3.115 true 0.604,3.865 0.958,3.531 false 0.698,2.271 0.99,2.698 true 1.771,1.917 1.375,2.656 true 0.885,3.125 0.563,3.125 true 4.208,0.208 4.375,0.354 0.167,0.146 10 false *a 1.99,3.042 2.167,3.188 0.177,0.146 10 false *c 0.375,3.042 0.552,3.188 0.177,0.146 10 false *e 0.458,3.844 0.604,4.01 0.146,0.167 10 false *f 0.542,2.125 0.708,2.292 0.167,0.167 10 false *d 1.813,1.813 1.99,1.979 0.177,0.167 10 false *b

Text in Illustration
*a Component without harness connected
(Steering Pad Switch Assembly)
*b SEEK+
*c SEEK- *d VOL+
*e VOL- *f MODE

Standard Resistance:
Tester Connection Switch Condition Specified Condition
10 (AU1) - 8 (EAU) No switch pushed 95 to 105 kΩ
9 (AU2) - 8 (EAU) No switch pushed 95 to 105 kΩ
10 (AU1) - 8 (EAU) VOL+ switch: pushed 950 to 1050 Ω
9 (AU2) - 8 (EAU) VOL+ switch: pushed 95 to 105 kΩ
10 (AU1) - 8 (EAU) VOL- switch: pushed 2955 to 3265 Ω
9 (AU2) - 8 (EAU) VOL- switch: pushed 95 to 105 kΩ
10 (AU1) - 8 (EAU) SEEK+ switch: pushed Below 2.5 Ω
9 (AU2) - 8 (EAU) SEEK+ switch: pushed 95 to 105 kΩ
10 (AU1) - 8 (EAU) SEEK- switch: pushed 313 to 345 Ω
9 (AU2) - 8 (EAU) SEEK- switch: pushed 95 to 105 kΩ
10 (AU1) - 8 (EAU) MODE switch: pushed 95 to 105 kΩ
9 (AU2) - 8 (EAU) MODE switch: pushed Below 2.5 Ω


If the result is not as specified, replace the steering pad switch assembly.


Hide 84250A 2.INSPECT STEERING PAD SWITCH ASSEMBLY (w/ Microphone)

a.

Measure the resistance according to the value(s) in the table below.

E232544E03
1.385,3.125 1.979,3.125 true 0.583,3.844 0.948,3.51 true 0.698,2.271 0.99,2.698 true 1.792,1.917 1.396,2.656 true 6.396,1.969 6,2.708 true 0.885,3.125 0.563,3.125 true 6.052,3.198 6.052,4.094 true 2.01,3.042 2.188,3.188 0.177,0.146 10 false *c 0.396,3.042 0.573,3.188 0.177,0.146 10 false *e 0.427,3.792 0.594,3.958 0.167,0.167 10 false *f 0.521,2.135 0.688,2.302 0.167,0.167 10 false *d 4.177,0.188 4.365,0.365 0.188,0.177 10 false *a 1.813,1.792 1.99,1.958 0.177,0.167 10 false *b 6.438,1.792 6.615,1.958 0.177,0.167 10 false *g 5.979,4.104 6.167,4.271 0.188,0.167 10 false *h

Text in Illustration
*a Component without harness connected
(Steering Pad Switch Assembly)
*b SEEK+
*c SEEK- *d VOL+
*e VOL- *f MODE
*g ON HOOK *h OFF HOOK

Standard Resistance:
Tester Connection Switch Condition Specified Condition
10 (AU1) - 8 (EAU) No switch pushed 95 to 105 kΩ
9 (AU2) - 8 (EAU) No switch pushed 95 to 105 kΩ
10 (AU1) - 8 (EAU) VOL+ switch: pushed 950 to 1050 Ω
9 (AU2) - 8 (EAU) VOL+ switch: pushed 95 to 105 kΩ
10 (AU1) - 8 (EAU) VOL- switch: pushed 2955 to 3265 Ω
9 (AU2) - 8 (EAU) VOL- switch: pushed 95 to 105 kΩ
10 (AU1) - 8 (EAU) SEEK+ switch: pushed Below 2.5 Ω
9 (AU2) - 8 (EAU) SEEK+ switch: pushed 95 to 105 kΩ
10 (AU1) - 8 (EAU) SEEK- switch: pushed 313 to 345 Ω
9 (AU2) - 8 (EAU) SEEK- switch: pushed 95 to 105 kΩ
10 (AU1) - 8 (EAU) MODE switch: pushed 95 to 105 kΩ
9 (AU2) - 8 (EAU) MODE switch: pushed Below 2.5 Ω
10 (AU1) - 8 (EAU) ON HOOK switch: pushed 95 to 105 kΩ
9 (AU2) - 8 (EAU) ON HOOK switch: pushed 313 to 345 Ω
10 (AU1) - 8 (EAU) OFF HOOK switch: pushed 95 to 105 kΩ
9 (AU2) - 8 (EAU) OFF HOOK switch: pushed 950 to 1050 Ω


If the result is not as specified, replace the steering pad switch assembly.