Home › Audio / Visual / Telematics › AUDIO / VIDEO › NOISE FILTER
RM19S0E _56 Audio / Visual / Telematics _051483 AUDIO / VIDEO _0248273 NOISE FILTER A

AUDIO / VIDEO  NOISE FILTER  REMOVAL  


PROCEDURE

Hide 89741 1.REMOVE DOOR CONTROL RECEIVER (for 5 Door)

Hide 89741 2.REMOVE DOOR CONTROL RECEIVER (for 3 Door)

Hide 86011A 3.REMOVE RADIO SETTING CONDENSER

NOTICE:

When the terminal cover is removed, the condenser must be replaced because the terminal cover and condenser are supplied as a set.


a.
E222081

Remove the bolt.


b.

Disengage the clamp and separate the condenser with the wire harness from the vehicle body.


c.
E183098E03
2.167,0.563 2.417,1.125 false 2.354,1.146 2.521,1.333 0.167,0.188 10 false *1

Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the terminal cover with the wire harness from the condenser.

Text in Illustration
*1 Protective Tape


d.

Using a screwdriver, bend back and break off the claw as shown in the illustration.

E183100


e.

Remove the terminal cover from the wire harness.