Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › from 2014.07
RM19S0E _56 Audio / Visual / Telematics _051483 AUDIO / VIDEO _0248274 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) U

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  TERMINALS OF ECU  


RADIO AND DISPLAY RECEIVER ASSEMBLY


U158721E02
2.219,0.24 2.573,0.396 0.354,0.156 10 false F128 1.458,1.646 1.813,1.792 0.354,0.146 10 false F125 2.25,1.646 2.635,1.833 0.385,0.188 10 false F126 3.854,1.615 4.208,1.802 0.354,0.188 10 false F129 5.385,1.469 5.635,1.656 0.25,0.188 10 false RA 4.479,0.24 4.865,0.427 0.385,0.188 10 false F127

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
F125-1 (FR+) - F125-7 (GND1) LG - BR Sound signal (Front Right) Audio system playing A waveform synchronized with sounds is output
F125-2 (FL+) - F125-7 (GND1) P - BR Sound signal (Front Left) Audio system playing A waveform synchronized with sounds is output
F125-3 (ACC1) - F125-7 (GND1) GR - BR Power source (ACC) Ignition switch off Below 1 V
Ignition switch ACC 11 to 14 V
F125-4 (+B1) - F125-7 (GND1) SB - BR Power source (+B) Always 11 to 14 V
F125-5 (FR-) - F125-7 (GND1) L - BR Sound signal (Front right) Audio system playing A waveform synchronized with sounds is output
F125-6 (FL-) - F125-7 (GND1) V - BR Sound signal (Front left) Audio system playing A waveform synchronized with sounds is output
F125-7 (GND1) - Body ground BR - Body ground Ground Always Below 1 V
F125-10 (ILL+) - F125-7 (GND1) G - BR Illumination signal Light control switch off Below 1 V
Light control switch in tail or head position 11 to 14 V
F126-1 (RR+) - F125-7 (GND1) R - BR Sound signal (Rear right) Audio system playing A waveform synchronized with sounds is output
F126-2 (RL+) - F125-7 (GND1) B - BR Sound signal (Rear left) Audio system playing A waveform synchronized with sounds is output
F126-3 (RR-) - F125-7 (GND1) W - BR Sound signal (Rear right) Audio system playing A waveform synchronized with sounds is output
F126-6 (RL-) - F125-7 (GND1) Y - BR Sound signal (Rear left) Audio system playing A waveform synchronized with sounds is output
F127-1 (IG) - F125-7 (GND1) LG - BR Power source (IG) Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V
F127-2 (REV) - F125-7 (GND1) V - BR Reverse signal See "Check Vehicle Signal" in Operation Check (See page (Click here)) -
F127-4 (MACC) - F125-7 (GND1) R - BR Microphone power supply Ignition switch off Below 1 V
Ignition switch ACC 4 to 6 V
F127-5 (MIN+) - F125-7 (GND1) G - BR Microphone voice signal See "Check Microphone" in Operation Check (See page (Click here)) -
F127-6 (SNS2) - F125-7 (GND1) GR - BR Microphone connection detection signal Always Below 1 V
F127-9 (CANH) BE CAN communication signal - -
F127-10 (CANL) W CAN communication signal - -
F127-11 (AGND) - Body ground Shield - Body ground Shield ground Always Below 1 V
F127-15 (PKB) - F125-7 (GND1) P - BR Parking brake signal See "Check Vehicle Signal" in Operation Check (See page (Click here)) -
F127-17 (SPD) - F125-7 (GND1) V - BR Vehicle speed signal See "Check Vehicle Signal" in Operation Check (See page (Click here)) -
F127-18 (SGND) - Body ground Shield - Body ground Shield ground Always Below 1 V
F127-19 (MIN-) - F125-7 (GND1) R - BR Microphone voice signal See "Check Microphone" in Operation Check (See page (Click here)) -
F127-21 (SW1) - F127-23 (SWG) L - R Steering pad switch signal No switch pushed 2.97 to 3.56 V
Seek+ switch pushed 0.27 to 0.35 V
Seek- switch pushed 0.86 to 1.03 V
Volume+ switch pushed 1.51 to 1.79 V
Volume- switch pushed 2.22 to 2.66 V
F127-22 (SW2) - F127-23 (SWG) P - R Steering pad switch signal No switch pushed 2.97 to 3.56 V
MODE/HOLD switch pushed 0.27 to 0.35 V
On hook switch pushed 0.86 to 1.03 V
Off hook switch pushed 1.51 to 1.79 V
Voice switch pushed 2.22 to 2.66 V
F127-23 (SWG) - F125-7 (GND1) R - BR Steering pad switch ground Always Below 1 V
F127-25 (ADPG) - F125-7 (GND1) R - BR External device connection detection signal External device connected Below 1 V
External device not connected 2.1 to 3 V
F127-26 (VAR+) - F127-27 (VA-) R - W Sound signal (Right) External device playing (When stereo jack used) A waveform synchronized with sounds is output
F127-27 (VA-) - F125-7 (GND1) W - BR Ground Always Below 1 V
F127-28 (VAL+) - F127-27 (VA-) B - W Sound signal (Left) External device playing (When stereo jack used) A waveform synchronized with sounds is output
F128-11 (CA+) - F125-7 (GND1) R - BR Television camera power supply Ignition switch ACC 5.5 to 7.05V
F128-12 (V+) - F125-7 (GND1) B - BR Video signal Ignition switch ON Shift lever in R Camera lens not covered, displaying an image Pulse generation (Refer to waveform 1)
Ignition switch ON Shift lever in R Camera lens covered, blacking out screen Pulse generation (Refer to waveform 2)
F128-23 (CGND) - Body ground Shield - Body ground Shield ground Always Below 1 V
F128-24 (V-) - F125-7 (GND1) W - BR Ground Always Below 1 V
F129-1 # Power source - -
F129-2 # Date signal - -
F129-3 # Date signal - -
F129-4 # Ground - -
F129-5 # Shield ground - -
RA-5 (ANT+) - F125-7 (GND1) # - BR Power source of antenna Ignition switch ACC
Radio switch on and FM or AM selected
11 to 14 V

#: There is no wire color information.


a.

Reference (Oscilloscope waveform):

i.
E181025E47
0.435,2.849 0.595,3.012 0.161,0.163 10 *b 0.183,0.128 0.343,0.290 0.161,0.163 10 *a 1.861,2.843 2.040,3.018 0.179,0.174 10 *c 0.143,1.451 0.508,1.620 0.365,0.169 10 GND 1.072,2.135 0.675,2.923 false 1.198,2.005 1.787,2.935 false

Waveform 1 (camera lens not covered, displaying an image)

Text in Illustration
*a Waveform 1 (camera lens not covered, display an image)
*b Synchronization Signal
*c Video Waveform

Item Content
Measurement terminal F128-12 (V+) - F125-7 (GND1)
Measurement setting 200 mV/DIV., 50 μsec./DIV.
Condition Ignition switch ON, shift lever in R

HINT:
·

The video waveform changes according to the image sent by rear the rear television camera assembly.

·

The video waveform is constantly output when the ignition switch is turned to ACC.




ii.
E251305E04
0.958,2.094 0.667,2.729 false 1.125,2.01 1.354,2.771 false 0.063,1.625 0.51,1.813 0.448,0.188 10 false GND 0.01,0 0.281,0.219 0.271,0.219 10 false *a 0.552,2.719 0.823,2.938 0.271,0.219 10 false *b 1.271,2.74 1.542,2.958 0.271,0.219 10 false *c

Waveform 2 (camera lens covered, blacking out the screen)

Text in Illustration
*a Waveform 2 (camera lens covered, blacking out the screen)
*b Synchronization Signal
*c Video Waveform

Item Content
Measurement terminal F128-12 (V+) - F125-7 (GND1)
Measurement setting 200 mV/DIV., 50 μsec./DIV.
Condition Ignition switch ON, shift lever in R

·

The video waveform changes according to the image sent by television camera assembly.

·

The video waveform is constantly output when the ignition switch is turned to ACC.