Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio and Display Type) › from 2014.07
RM19S0E _56 Audio / Visual / Telematics _051483 AUDIO / VIDEO _0248274 AUDIO AND VISUAL SYSTEM(for Radio and Display Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type)  Display does not Dim when Light Control Switch is Turned ON  


PROCEDURE

1.CHECK IMAGE QUALITY SETTING
a.

Turn the light control switch in the tail or head position.


b.

Check that the daytime screen setting on the display adjustment screen is set to on.

Result
Result Proceed to
Daytime screen setting is on A
Daytime screen setting is off B



A

TURN "Day Mode" SETTING OFF

B

2.CHECK VEHICLE SIGNAL (OPERATION CHECK)
2.CHECK VEHICLE SIGNAL (OPERATION CHECK)
a.
E225854

Enter the "Vehicle Signal Check Mode" screen. [Refer to Check Vehicle Signal in Operation Check (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(for Radio and Display Type)>OPERATION CHECK)]


b.

Check that the display for changes between ON and OFF according to the light control switch operation.

OK:
Light Control Switch Condition Display
Tail or head ON
Off OFF



HINT:

The display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG