86212
1.INSTALL NO. 2 RADIO BRACKET
Install the No. 2 radio bracket with the 3 bolts.
86211
2.INSTALL NO. 1 RADIO BRACKET
Install the No. 1 radio bracket with the 3 bolts.
3.INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET
Connect the connectors.
Engage the 5 clips to install the navigation receiver assembly with bracket.
Install the 4 screws.
55405B
4.INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY
55475B
5.INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL GARNISH
55411G
6.INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL