55411G
1.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL
55475B
2.REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL GARNISH
55405B
3.REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY
4.REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET
Remove the 4 screws.
Disengage the 5 clips.
Disconnect the connectors to remove the navigation receiver assembly with bracket.
86211
5.REMOVE NO. 1 RADIO BRACKET
Remove the 3 bolts and No. 1 radio bracket.
86212
6.REMOVE NO. 2 RADIO BRACKET
Remove the 3 bolts and No. 2 radio bracket.