Home › Vehicle Interior › DOOR LOCK › TRANSMITTER BATTERY
RM19S0E _58 Vehicle Interior _051490 DOOR LOCK _0248291 TRANSMITTER BATTERY A

DOOR LOCK  TRANSMITTER BATTERY  REPLACEMENT  


PROCEDURE

Hide 89751A 1.REMOVE TRANSMITTER HOUSING COVER

Hide 89071B 2.REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY

Hide 89745A 3.REMOVE TRANSMITTER BATTERY

a.
B264882

Disengage the hook and remove the transmitter battery cover.


b.
B264883

Remove the battery (lithium battery: CR2016).

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

·

Do not push the terminals with your finger.

·

Do not use excessive force when prying up the battery (lithium battery: CR2016) as this may damage the terminals.

·

Do not touch the battery with wet hands. Water may cause it to rust.

·

Do not touch or move any components inside the transmitter as this may interfere with its proper operation.




Hide 89745A 4.INSTALL TRANSMITTER BATTERY

a.
B264884

Install a battery (lithium battery: CR2016) with the positive (+) side facing upward, as shown in the illustration.

NOTICE:
·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

·

Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.

·

Do not bend the transmitter battery electrode during insertion.

·

Keep the transmitter cover interior free of dust and oil.




b.
B266612

Engage the hook and install the transmitter battery cover.


Hide 89071B 5.INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY

Hide 89751A 6.INSTALL TRANSMITTER HOUSING COVER