Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH
RM19S0E _58 Vehicle Interior _051490 DOOR LOCK _0248294 UNLOCK WARNING SWITCH G

DOOR LOCK  UNLOCK WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 84052 1.INSPECT UNLOCK WARNING SWITCH ASSEMBLY

a.
B225713E05
1.195,3.948 1.195,4.215 false 1.119,4.217 1.270,4.365 0.151,0.148 10 *1 0.129,0.097 0.280,0.245 0.151,0.148 10 *a 1.916,1.504 2.314,1.902 false 1.472,1.504 1.074,1.902 false 2.224,1.927 2.589,2.096 0.365,0.169 10 UN+ 0.883,1.927 1.248,2.096 0.365,0.169 10 UN-

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*1 Lever
*a Component without harness connected
(Unlock Warning Switch Assembly)

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (UN+) - 2 (UN-) Lever not pushed 10 kΩ or higher
Lever pushed Below 1 Ω


If the result is not as specified, replace the unlock warning switch.