Home › Vehicle Interior › DOOR LOCK › FRONT DOOR LOCK
RM19S0E _58 Vehicle Interior _051490 DOOR LOCK _0248295 FRONT DOOR LOCK G

DOOR LOCK  FRONT DOOR LOCK  INSPECTION  


PROCEDURE

Hide 69040A 1.INSPECT FRONT DOOR LOCK ASSEMBLY LH

a.
B228534E11
1.608,2.823 1.771,2.974 0.163,0.151 10 *c 2.422,2.455 2.593,2.602 0.171,0.147 10 *b 0.173,0.141 0.334,0.293 0.161,0.152 10 *a 0.839,3.766 0.960,3.911 0.121,0.145 10 L 2.64,3.757 2.858,3.906 0.218,0.149 10 UL 0.985,3.845 1.353,3.845 false 2.223,3.845 2.591,3.845 false

Check the operation of the front door lock motor.

Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly LH)
*b UNLOCK
*c LOCK

i.

Apply battery voltage and check the operation of the front door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)
Locked
Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)
Unlocked


If the result is not as specified, replace the front door lock assembly LH.



b.
B228534E12
1.61,2.794 1.773,2.945 0.163,0.151 10 *c 2.396,2.448 2.558,2.601 0.162,0.152 10 *b 0.175,0.132 0.340,0.290 0.165,0.158 10 *a 2.023,4.448 2.142,4.593 0.119,0.145 10 E 1.269,4.449 1.659,4.592 0.390,0.143 10 LSSR 1.683,4.161 1.495,4.438 false 1.891,4.161 2.078,4.438 false

Check the resistance of the unlock detection switch. (for LHD)

Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly LH)
*b UNLOCK
*c LOCK

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (E) - 8 (LSSR) Locked 10 kΩ or higher
Unlocked Below 1 Ω


If the result is not as specified, replace the front door lock assembly LH.



c.
B228538E11
3.166,0.681 3.329,0.833 0.163,0.151 10 *d 2.724,0.309 2.888,0.460 0.163,0.151 10 *c 2.077,0.464 2.253,0.615 0.176,0.151 10 *b 0.117,0.096 0.288,0.242 0.170,0.146 10 *a 2.041,4.463 2.176,4.608 0.135,0.145 10 E 1.713,4.462 1.821,4.609 0.108,0.147 10 L 1.048,4.463 1.255,4.608 0.207,0.145 10 UL 1.357,4.168 1.171,4.457 false 1.583,4.168 1.77,4.457 false 1.893,4.168 2.079,4.457 false

Check the resistance of the door lock and unlock switch. (for LHD)

Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly LH)
*b LOCK
*c OFF
*d UNLOCK

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (E) - 9 (L) Locked Below 1 Ω
Unlocked 10 kΩ or higher
7 (E) - 10 (UL) Locked 10 kΩ or higher
Unlocked Below 1 Ω


If the result is not as specified, replace the front door lock assembly LH.



Hide 69030A 2.INSPECT FRONT DOOR LOCK ASSEMBLY RH

a.
B228535E11
1.554,2.805 1.717,2.956 0.163,0.151 10 *c 0.767,2.451 0.924,2.592 0.157,0.141 10 *b 0.126,0.109 0.283,0.262 0.157,0.153 10 *a 0.85,3.764 0.962,3.909 0.112,0.145 10 L 2.632,3.764 2.840,3.911 0.208,0.147 10 UL 0.995,3.845 1.346,3.845 false 2.233,3.845 2.583,3.845 false

Check the operation of the front door lock motor.

Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly LH)
*b UNLOCK
*c LOCK

i.

Apply battery voltage and check the operation of the front door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 4 (L)
Battery negative (-) → 1 (UL)
Locked
Battery positive (+) → 1 (UL)
Battery negative (-) → 4 (L)
Unlocked


If the result is not as specified, replace the front door lock assembly RH.



b.
B228535E12
1.559,2.761 1.722,2.912 0.163,0.151 10 *c 0.788,2.44 0.945,2.581 0.157,0.141 10 *b 0.122,0.098 0.279,0.251 0.157,0.153 10 *a 1.356,4.43 1.468,4.576 0.112,0.145 10 E 1.925,4.436 2.312,4.586 0.387,0.150 10 LSSR 1.67,4.153 1.424,4.419 false 1.888,4.153 2.134,4.419 false

Check the resistance of the unlock detection switch. (for RHD)

Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly LH)
*b UNLOCK
*c LOCK

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
7 (LSSR) - 8 (E) Locked 10 kΩ or higher
Unlocked Below 1 Ω


If the result is not as specified, replace the front door lock assembly RH.



c.
B230878E05
2.104,3.948 2.406,3.948 false 1.667,3.99 1.521,4.292 false 1.979,3.99 2.125,4.292 false 0.135,0.115 0.313,0.271 0.177,0.156 10 false *a 1.385,1.635 1.542,1.781 0.156,0.146 10 false *b 0.76,1.448 0.917,1.594 0.156,0.146 10 false *c 0.24,1.844 0.396,2 0.156,0.156 10 false *d 2.104,4.313 2.208,4.458 0.104,0.146 10 false L 1.458,4.313 1.583,4.458 0.125,0.146 10 false E 2.458,3.865 2.656,4.01 0.198,0.146 10 false UL

Check the resistance of the door lock and unlock switch. (for RHD)

Text in Illustration
*a Component without harness connected
(Front Door Lock Assembly RH)
*b LOCK
*c OFF
*d UNLOCK

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
8 (E) - 6 (L) Locked Below 1 Ω
Unlocked 10 kΩ or higher
8 (E) - 5 (UL) Locked 10 kΩ or higher
Unlocked Below 1 Ω


If the result is not as specified, replace the front door lock assembly RH.