69350
1.INSPECT BACK DOOR LOCK ASSEMBLY
Check the operation of the back door lock motor.
| *1 | Latch |
| *a | Lock |
| *b | Unlock |
| *c | Component without harness connected
(Back Door Lock Assembly) |
Move the back door lock to the lock position.
Apply the battery voltage and check the operation of the back door lock motor.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1 (ACT+)
Battery negative (-) → 2 (ACT-) |
Locked → Unlocked |
If the result is not as specified, replace the back door lock assembly.