Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM
RM19S0E _58 Vehicle Interior _051491 THEFT DETERRENT / KEYLESS ENTRY _0248300 ENGINE IMMOBILISER SYSTEM C

THEFT DETERRENT / KEYLESS ENTRY  ENGINE IMMOBILISER SYSTEM  B279C  Theft Deterrent System Presence Detection  


DESCRIPTION

This code is stored when an ECM that is incompatible with the engine immobiliser system is installed to the vehicle.

DTC Code DTC Detection Condition Trouble Area DTC Output Confirmation Operation
B279C An ECM that is incompatible with the engine immobiliser system is installed (1 trip detection logic*). ECM Check for DTCs.

*: Only output while a malfunction is present.


Vehicle Condition and Fail-safe Operation when Malfunction Detected
Vehicle Condition when Malfunction Detected Fail-safe Operation when Malfunction Detected
Engine cannot be started -

Related Data List and Active Test
DTC Code Data List and Active Test
B279C -

CAUTION / NOTICE / HINT

NOTICE:

After performing repair, perform the operation that fulfills the DTC output confirmation operation, and then confirm that no DTCs are output again.


PROCEDURE

1.REPLACE CURRENT ECM WITH PROPER ECM
a.

Replace the current ECM with the proper ECM.

HINT:




NEXT

END