Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM
RM19S0E _58 Vehicle Interior _051492 LIGHTING (INT) _0248303 LIGHTING SYSTEM D

LIGHTING (INT)  LIGHTING SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE LIGHTING SYSTEM (INT)


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Record the current settings before customizing.



a.

Customizing with the intelligent tester.

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the intelligent tester on.


iv.

Enter the following menus: Body / Main Body / Utility / Customize / Illuminated Entry.


v.

Select the setting by referring to the table below.

Illuminated Entry
Display Default Content Setting Relevant ECU
Lighting Time*1 15 s A function that changes the duration that the lights remain on after closing the doors (the lights quickly fade out when the ignition switch is turned to ACC or ON). 15 s / 7.5 s / 30 s Main body ECU
I/L when ACC OFF*1 ON A function that turns on the lights when the ignition switch is turned from ON or ACC to off (the lights turn on when the room light switch are set to DOOR). OFF or ON Main body ECU
I/L ON W/Door Key Unlock*1 ON A function that turns on the lights when the door is unlocked (the lights turn on when the room light switch are set to DOOR). OFF or ON Main body ECU

*1: w/ Automatic Light Control System