Home › Vehicle Interior › LIGHTING (INT) › BACK DOOR COURTESY SWITCH
RM19S0E _58 Vehicle Interior _051492 LIGHTING (INT) _0248308 BACK DOOR COURTESY SWITCH G

LIGHTING (INT)  BACK DOOR COURTESY SWITCH  INSPECTION  


PROCEDURE

Hide 69350 1.INSPECT BACK DOOR LOCK ASSEMBLY (w/ Power Door Lock)

a.

Measure the resistance according to the value(s) in the table below.

E346312E01
1.667,1.646 1.969,1.26 false 1.792,3.469 2.031,3.188 false 0.781,0.396 1.01,0.573 0.229,0.177 10 false *a 0.833,2.24 1.063,2.417 0.229,0.177 10 false *b 1.573,1.656 1.802,1.833 0.229,0.177 10 false *1 4.479,1.313 4.708,1.49 0.229,0.177 10 false *c 1.667,3.479 1.896,3.656 0.229,0.177 10 false *1

Text in Illustration
*1 Latch
*a Locked
*b Unlocked
*c Component without harness connected
(Back Door Lock Assembly)

Standard Resistance:
Tester Connection Condition Specified Condition
2(ACT-) - 3(D+) Unlocked Below 1 Ω
Locked 10 kΩ or higher


If the result is not specified, replace the back door lock assembly.


Hide 69350 2.INSPECT BACK DOOR LOCK ASSEMBLY (w/o Power Door Lock)

a.

Measure the resistance according to the value(s) in the table below.

E346314E01
1.76,1.615 2.094,1.219 false 1.802,3.531 2.135,3.135 false 1.042,0.375 1.354,0.573 0.313,0.198 10 false *a 1.042,2.146 1.354,2.344 0.313,0.198 10 false *b 4.448,1.229 4.76,1.427 0.313,0.198 10 false *c 1.635,1.604 1.948,1.802 0.313,0.198 10 false *1 1.667,3.521 1.979,3.719 0.313,0.198 10 false *1

Text in Illustration
*1 Latch
*a Locked
*b Unlocked
*c Component without harness connected
(Back Door Lock Assembly)

Standard Resistance:
Tester Connection Condition Specified Condition
1(ACT-) - 2(D+) Unlocked Below 1 Ω
Locked 10 kΩ or higher


If the result is not specified, replace the back door lock assembly.