METER GAUGE AND WARNING INDICATOR
| Item | Signal Description |
|---|---|
| Speedometer | Indicates vehicle speed based on signals received from brake actuator assembly (skid control ECU) (Direct line).*1
Indicates vehicle speed based on signals received from speedometer sensor (Direct line).*2 Indicates vehicle speed based on signals received from brake actuator assembly (skid control ECU) (CAN).*3 |
| Tachometer | Indicates engine speed based on signals from ECM (CAN). |
| Fuel Gauge | Indicates fuel level in accordance with signals received from fuel sender gauge (Direct line). |
| ODO/TRIP meter | Calculates accumulated total vehicle travel distance and vehicle travel distance since mode switch pressed. |
*1: w/ ABS
*2: w/o ABS
*3: for Australia
| Item | Signal Description |
|---|---|
| TURN | Receives turn signal from headlight dimmer switch assembly (Direct line). |
| BEAM | Receives high beam signal from DIM relay (Direct line). |
| TAIL | Receives taillight signal from TAIL relay (Direct line). |
| FRONT FOG*1 | Receives front fog light signal from FR FOG relay (Direct line). |
| BRAKE | ·
Receives brake fluid level warning signal from brake level switch (Direct line). ·
Receives parking brake switch signal from main body ECU (multiplex network body ECU) (CAN). ·
Receives malfunction signal from brake actuator assembly (skid control ECU) (CAN). |
| ABS | Receives malfunction signal from brake actuator assembly (skid control ECU) (CAN). |
| OIL PRESSURE | Receives engine oil pressure warning signal from engine oil pressure switch (Direct line). |
| MIL | Receives malfunction check engine warning signal from ECM (Direct line). |
| D BELT | Receives driver seat belt warning signal (unfastened) from main body ECU (multiplex network body ECU) (CAN). |
| AIRBAG | Receives malfunction signal from airbag sensor assembly (CAN). |
| Engine coolant temperature HOT | Receives engine coolant temperature signal from ECM (CAN). |
| Engine coolant temperature COOL | Receives engine coolant temperature signal from ECM (CAN). |
| CHARGE | Receives malfunction signal from generator (Direct Line). |
| DOOR | Open door indicator illuminates when receiving signal from main body ECU (multiplex network body ECU) (CAN). |
| FUEL | Receives fuel level signal from fuel sender gauge assembly (Direct line). |
| EPS | Receives malfunction signal from power steering ECU (CAN). |
| VSC OFF*2 | Receives VSC off signal from brake actuator assembly (skid control ECU) (CAN). |
| SLIP*2 | Receives malfunction signal from brake actuator assembly (skid control ECU) (CAN). |
| TRC OFF*2 | Receives TRC off signal from brake actuator assembly (skid control ECU) (CAN). |
| CRUISE*3 | Receives cruise indicator signal from ECM (CAN). |
| CRUISE SET*3 | Receives cruise indicator signal from ECM (CAN). |
| ECO*6 | Receives ecology light indicator signal from the ECM (CAN) and illuminates when the vehicle is being driven ECO-friendly. |
| 120 km/h*7 | Receives vehicle speed signal from brake actuator assembly (skid control ECU) (Direct line).*8
Receives vehicle speed signal from speedometer sensor (Direct line).*9 |
| Gear Shift Indicator (Shift UP/DOWN)*4 | Receives shift up/down signal from the ECM (CAN). |
| P shift position indicator*5 | Receives a P signal from the ECM (CAN). |
| R shift position indicator*5 | Receives an R signal from the ECM (CAN). |
| N shift position indicator*5 | Receives an N signal from the ECM (CAN). |
| D shift position indicator*5 | Receives a D signal from the ECM (CAN).
During oil level confirmation mode, receives an A/T oil temperature signal and indicates the A/T oil temperature by turning off / blinking / turning on the shift position D indicator. |
| 2 shift position indicator*5 | Receives an 2 signal from the ECM (CAN). |
| L shift position indicator*5 | Receives an L signal from the ECM (CAN). |
*1: w/ Fog Light
*2: w/ VSC
*3: w/ Cruise Control System
*4: for Manual Transaxle
*5: for Automatic Transaxle
*6: w/ ECO Driving Indicator
*7: w/ Speed Warning Function
*8: w/ ABS
*9: w/o ABS
| Item | Signal Description |
|---|---|
| LIGHT Reminder | Buzzer ON: When ignition switch is off, light control switch is in TAIL position, and driver side door is open. |
| KEY Reminder | Buzzer ON: Ignition switch is off, key is inserted, and driver side door is open. |
| Seat Belt Warning (driver and passenger seat belt) | Buzzer ON: When ignition switch is ON, driver or passenger seat belt is unfastened, and vehicle speed is 20 km/h (12.4 mph) or more. |
| PKB Reminder | Buzzer ON: When ignition switch is ON, parking brake is operating, and vehicle speed is 5 km/h (3.1 mph) or more. |
| 120 km/h*2 | Receives vehicle speed signal from brake actuator assembly (skid control ECU) (Direct line).*3
Receives vehicle speed signal from speedometer sensor (Direct line).*4 |
| EPS buzzer | Buzzer ON: Receives signal from the power steering ECU assembly. |
| Warning of driving with door open | Buzzer ON: When ignition switch is ON, vehicle speed is 5 km/h (3.1 mph) or more, and each door courtesy light switch ON. |
*1: w/ Immobiliser System
*2: w/ Speed Warning Function
*3: w/ ABS
*4: w/o ABS
| Item | Signal Description | |
|---|---|---|
| Cruise information | ·
Instantaneous fuel consumption ·
Average fuel consumption since refueling ·
Possible running distance ·
Average speed |
The display can be switched using the MODE switch located on the lower left of the combination meter. |
LED CHECK
Check the indicator/warning light operation according to the condition(s) in the table below.
| Indicator/Warning Light | Specification |
|---|---|
| BRAKE, ABS, VSC OFF, SLIP, ECO*1 | Indicator/Warning light comes on for about 3 seconds after turning the ignition switch to ON. |
| AIRBAG | Warning light comes on for about 6 seconds after turning the ignition switch to ON. |
| OIL PRESSURE, CHECK ENGINE, CHARGE, EPS, SHIFT UP/DOWN*2 | Indicator/Warning light comes on after turning the ignition switch to ON and the indicator light goes off after the engine starts. |
*1: w/ ECO Driving Indicator
*2: for Manual Transaxle