METER GAUGE AND WARNING INDICATOR
| Item | Signal Description |
|---|---|
| Speedometer | Indicates vehicle speed based on signals received from brake actuator assembly (skid control ECU) (CAN). |
| Tachometer | Indicates engine speed based on signals from ECM (CAN). |
| Fuel Gauge | Indicates fuel level in accordance with signals received from fuel sender gauge (Direct line). |
| ODO/TRIP meter | Calculates accumulated total vehicle travel distance and vehicle travel distance since mode switch pressed. |
| Item | Signal Description |
|---|---|
| TURN | Receives turn signal from headlight dimmer switch assembly (Direct line). |
| BEAM | Receives high beam signal from DIM relay (Direct line). |
| TAIL | Receives taillight signal from TAIL relay (Direct line). |
| FRONT FOG*1 | Receives front fog light signal from FOG FR relay (Direct line). |
| BRAKE | ·
Receives brake fluid level warning signal from brake level switch (Direct line). ·
Receives malfunction signal from brake actuator assembly (skid control ECU) (CAN). |
| ABS | Receives malfunction signal from brake actuator assembly (skid control ECU) (CAN). |
| OIL PRESSURE | Receives engine oil pressure warning signal from engine oil pressure switch (Direct line). |
| MIL | Receives malfunction check engine warning signal from ECM (Direct line). |
| D BELT | Receives driver seat belt warning signal (unfastened) from main body ECU (multiplex network body ECU) (CAN). |
| AIRBAG | Receives malfunction signal from airbag sensor assembly (CAN). |
| Engine coolant temperature HOT | Receives engine coolant temperature signal from ECM (CAN). |
| Engine coolant temperature COOL | Receives engine coolant temperature signal from ECM (CAN). |
| CHARGE | Receives malfunction signal from generator assembly (Direct Line). |
| DOOR | Open door indicator illuminates when receiving signal from main body ECU (multiplex network body ECU) (CAN). |
| FUEL | Receives fuel level signal from fuel sender gauge assembly (Direct line). |
| EPS | Receives malfunction signal from power steering ECU (CAN). |
| VSC OFF | Receives VSC off signal from brake actuator assembly (skid control ECU) (CAN). |
| SLIP | Receives malfunction signal from brake actuator assembly (skid control ECU) (CAN). |
| TRC OFF | Receives TRC off signal from brake actuator assembly (skid control ECU) (CAN). |
| CRUISE*2 | Receives cruise indicator signal from ECM (CAN). |
| CRUISE SET*2 | Receives cruise indicator signal from ECM (CAN). |
| ECO*3 | Receives ecology light indicator signal from ECM (CAN) and illuminates when the vehicle is being driven ECO-friendly. |
| P shift position indicator*4 | Receives a P signal from ECM (CAN). |
| R shift position indicator*4 | Receives an R signal from ECM (CAN). |
| N shift position indicator*4 | Receives an N signal from ECM (CAN). |
| D shift position indicator*4 | Receives a D signal from ECM (CAN).
During oil level confirmation mode, receives an A/T oil temperature signal and indicates the A/T oil temperature by turning off / blinking / turning on the shift position D indicator. |
| 2 shift position indicator*4 | Receives an 2 signal from ECM (CAN). |
| L shift position indicator*4 | Receives an L signal from ECM (CAN). |
| LED headlight warning light*5 | Receives LED headlight warning signal from main body ECU (multiplex network body ECU) (CAN). |
| Headlight leveling warning light*6 | Receives auto leveling warning signal from headlight leveling ECU assembly (Direct line). |
| Parking brake warning light | Receives parking brake signals from the main body ECU (multiplex network body ECU) (CAN). |
*1: w/ Fog Light
*2: w/ Cruise Control System
*3: w/ ECO Driving Indicator
*4: for Automatic Transaxle
*5: for LED Headlight
*6: w/ Headlight Leveling
| Item | Signal Description |
|---|---|
| LIGHT Reminder | Buzzer ON: When ignition switch is off, light control switch is in TAIL position, and driver side door is open. |
| KEY Reminder | Buzzer ON: Ignition switch is off, key is inserted, and driver side door is open. |
| Seat Belt Warning (driver and passenger seat belt) | Buzzer ON: When ignition switch is ON, driver or passenger seat belt is unfastened, and vehicle speed is 20 km/h (12.4 mph) or more. |
| PKB Reminder | Buzzer ON: When ignition switch is ON, parking brake is operating, and vehicle speed is 5 km/h (3.1 mph) or more. |
| EPS buzzer | Buzzer ON: Receives signal from the power steering ECU assembly. |
| Warning of driving with door open | Buzzer ON: When ignition switch is ON, vehicle speed is 5 km/h (3.1 mph) or more, and each door courtesy light switch ON. |
| Oil pressure buzzer | Buzzer ON: Receives oil pressure signal from oil pressure switch assembly. |
| Engine coolant temperature warning buzzer | Buzzer ON: Receives engine coolant temperature signal from ECM |
| Item | Signal Description | |
|---|---|---|
| Cruise information | ·
Instantaneous fuel consumption ·
Average fuel consumption since refueling ·
Possible running distance ·
Average speed |
The display can be switched using the MODE switch located on the lower left of the combination meter. |
LED CHECK
Check the indicator/warning light operation according to the condition(s) in the table below.
| Indicator/Warning Light | Specification |
|---|---|
| BRAKE, ABS, VSC OFF, SLIP, P-BRAKE, ECO*1, WATER TEMPERATURE, TRC OFF, LED HEADLIGHT*2, AUTO LEVELING*3 | Indicator/Warning light comes on for about 3 seconds after turning the ignition switch to ON. |
| AIRBAG | Warning light comes on for about 6 seconds after turning the ignition switch to ON. |
| OIL PRESSURE, CHECK ENGINE, CHARGE, EPS | Indicator/Warning light comes on after turning the ignition switch to ON and the indicator light goes off after the engine starts. |
*1: w/ ECO Driving Indicator
*2: for LED Headlight
*3: w/ Headlight Leveling