Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM
RM19S0E _58 Vehicle Interior _051493 METER / GAUGE / DISPLAY _0248310 METER / GAUGE SYSTEM D

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  DTC CHECK / CLEAR  


CHECK DTC


a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the intelligent tester on.


d.

Enter the following menus: Body / Combination Meter / DTC.


e.

Check DTCs and then write them down.

HINT:

Refer to the intelligent tester operator's manual for further details.



f.

Confirm the details of the DTCs.



CLEAR DTC


a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON (do not start the engine).


c.

Turn the intelligent tester on.


d.

Enter the following menus: Body / Combination Meter / DTC / Clear.

HINT:

Refer to the intelligent tester operator's manual for further details.



e.

Clear DTCs by pressing the YES button on the tester.

HINT:

Refer to the intelligent tester operator's manual for further details.