Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM (w/ VSC/Built-in Type Yaw Rate Sensor)
RM19S0E _58 Vehicle Interior _051495 SUPPLEMENTAL RESTRAINT SYSTEMS _0248314 AIRBAG SYSTEM(w/ VSC/Built-in Type Yaw Rate Sensor) D

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM(w/ VSC/Built-in Type Yaw Rate Sensor)  CHECK MODE PROCEDURE  


CHECK MODE (SIGNAL CHECK): DTC CHECK


a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Select Signal Check, and proceed with checking using the intelligent tester.

NOTICE:

Select Signal Check from the DTC Check screen displayed on the intelligent tester to clear the output DTCs (both present and past).


HINT:
·

DTCs can be detected more sensitively in check mode than in normal diagnosis mode.

·

Perform the check mode inspection when a malfunction in each squib circuit is suspected even after the normal system code is output through the normal diagnosis mode inspection.