Wear protective gloves. Sharp areas on the parts may injure your hands.
71075B
1.REMOVE BENCH TYPE REAR SEAT CUSHION COVER
Remove the 44 hog rings and the bench type rear seat cushion cover from the bench type rear seat cushion pad.
71940A
2.REMOVE REAR SEAT HEADREST ASSEMBLY
Remove the rear seat headrest assembly.
71960B
3.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY
Remove the rear seat center headrest assembly.
72996A
4.REMOVE REAR SEATBACK COVER
Use the same procedure for both sides.
| *1 | Protective Tape |
Using a screwdriver wrapped with protective tape, disengage the 4 claws to remove the rear seatback cover.
72661C
5.REMOVE REAR SEATBACK LOCK RELEASE BUTTON
Turn the rear seatback lock release button in the direction indicated by arrow to remove it.
72646
6.REMOVE REAR SEATBACK STOP BUTTON GROMMET
Disengage the 2 claws to remove the rear seatback stop button grommet.
71931A
7.REMOVE REAR SEAT HEADREST SUPPORT
Using a clip remover, remove the 8 clips.
Disengage the 5 hooks.
Disengage the 8 claws to remove the 4 front seat headrest supports.
71018
8.REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY LH
Remove the rear seatback frame sub-assembly LH.
72640A
9.REMOVE REAR SEATBACK LOCK ASSEMBLY LH
Remove the 2 bolts and the rear seatback lock assembly LH from the rear seatback frame subassembly LH.
71078S
10.REMOVE SEPARATE TYPE REAR SEATBACK COVER
Remove the 6 hog rings and the separate type rear seatback cover from the separate type rear seatback pad.