1.INSTALL REAR SEATBACK ASSEMBLY
Engage the 2 hooks and temporarily install the rear seatback assembly.
Install the 2 bolts in the sequence shown in the illustration.
Pull back the rear seatback assembly.
72693
2.INSTALL REAR SEAT CUSHION LOCK HOOK
Engage the 4 claws to install the 2 rear seat cushion lock hooks.
71601A
3.INSTALL REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY
Pass the rear seat inner belt through the slit of the rear seat cushion cover with pad sub-assembly.
| *1 | Rear Side of Rear Seat Cushion Frame |
| *2 | Rear Seat Cushion Lock Hook |
Align the rear side of the rear seat cushion frame with the 2 hooks.
Engage the 2 hooks with the rear seat cushion lock hooks to install the rear seat cushion cover with pad sub-assembly.
Check that the rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.
64330D
4.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)