Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY(for Driver Side)
RM19S0E _58 Vehicle Interior _051497 SEAT BELT _0248336 FRONT SEAT INNER BELT ASSEMBLY(for Driver Side) G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for Driver Side)  INSPECTION  


PROCEDURE

Hide 73240 1.INSPECT FRONT SEAT INNER BELT ASSEMBLY

a.
B292981E01
0.043,0 0.233,0.167 0.190,0.167 10 *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Front Seat Inner Belt Assembly (for Driver Side))

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Tongue plate fastened 10 kΩ or higher
Tongue plate released Below 1 Ω


If the result is not as specified, replace the front seat inner belt assembly.