73230
1.INSPECT FRONT SEAT INNER BELT ASSEMBLY (w/ Wire Harness)
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A-3 - B-1 | Always | Below 1 Ω |
| A-2 - B-3 | Front passenger side tongue plate released | Below 1 Ω |
| A-2 - B-3 | Front passenger side tongue plate fastened | 10 kΩ or higher |
| *a | Component without harness connected
(Front Seat Inner Belt Assembly) |
| *b | Component without harness connected
(Occupant Detection Sensor (Separate Type Front Seat Cushion Pad)) |
If the result is not as specified, replace the front seat inner belt assembly.