Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR
RM19S0E _58 Vehicle Interior _051497 SEAT BELT _0248349 OCCUPANT DETECTION SENSOR G

SEAT BELT  OCCUPANT DETECTION SENSOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT OCCUPANT DETECTION SENSOR

a.
B258852E05
0.129,0.083 0.278,0.234 0.149,0.151 10 *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
Separate Type Front Seat Cushion Pad (Occupant Detection Sensor)

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Front passenger side seat occupied Below 100 Ω
Front passenger side seat not occupied 1 MΩ or higher


If the result is not as specified, replace the occupant detection sensor (separate type front seat cushion pad).