Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) › from 2014.07
RM19S0E _58 Vehicle Interior _051498 HEATING / AIR CONDITIONING _0248350 AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System) D

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)  CUSTOMIZE PARAMETERS  


CUSTOMIZE AIR CONDITIONING SYSTEM


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Record the current settings before customizing.



a.

Customizing with the GTS.

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Air Conditioner.


v.

Select the setting by referring to the table below.

Air Conditioner
Display Default Contents Setting Relevant ECU
Set Temperature Shift Normal Function to control with the shifted temperature against the display temperature. -2 C, -1 C, Normal, +1 C or +2 C Air conditioning amplifier assembly
Evaporator Control Automatic Function to set the evaporator control to the Automatic position (AUTO) to save power or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows fogging up. Automatic or Manual Air conditioning amplifier assembly
Air Inlet Mode Automatic In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATED mode. Automatic or Manual Air conditioning amplifier assembly
Foot/DEF Auto Mode ON Function to turn the air flow from Foot/DEF ON automatically when AUTO MODE is ON. ON or OFF Air conditioning amplifier assembly
Foot/DEF Automatic Blow Up Function ON Function to switch the blower level automatically when the defroster is ON. ON or OFF Air conditioning amplifier assembly
Refrigerant Shortage Check ON Function to cancel the Refrigerant Shortage Check in Normal Operation when item is OFF. ON or OFF Air conditioning amplifier assembly
Fan speed increment control Normal Not available Fast, Normal or Slow Air conditioning amplifier assembly



b.

Customizing using the radio and display receiver assembly.

i.

Turn the ignition switch to ON.


ii.

Enter the following menus: SETUP / Vehicle / Vehicle Customization / Climate settings.


iii.

Select the setting by referring to the table below.

Climate settings
Display Default Contents Setting Relevant ECU
Efficient Ventilation Mode On Function to change the mode automatically to recirculation air mode when turning the air conditioning on to cool the cabin quickly. On or Off Air conditioning amplifier assembly