87050D
1.REMOVE NO. 2 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
Remove the 2 screws and the air conditioning radiator damper servo.
87050C
2.REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)
Remove the 2 screws and the air conditioning radiator damper servo.
55906A
3.REMOVE DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the defroster damper control cable.
| *1 | Protective Tape |
55909A
4.REMOVE AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)
Remove the plate.
Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the air mix damper control cable.
| *1 | Protective Tape |
88897U
5.REMOVE ASPIRATOR PIPE (for Automatic Air Conditioning System)
Disengage the 2 claws and remove the aspirator pipe.
87107A
6.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
Disengage the 3 claws and remove the clamp.
Remove the heater radiator unit from the air conditioner radiator.
88515
7.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and detach the cooler expansion valve.
Remove the 2 O-rings from the cooler evaporator.
88539J
8.REMOVE DRAIN COOLER HOSE
Remove the drain cooler hose.
88501
9.REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
Disengage the clamp and remove the connector from the lower heater case.
Remove the 3 screws.
Disengage the 4 claws and remove the lower heater case.
Remove the cooler evaporator with the cooler thermistor.
88625
10.REMOVE NO. 1 COOLER THERMISTOR