Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT
RM19S0E _58 Vehicle Interior _051498 HEATING / AIR CONDITIONING _0248354 BLOWER UNIT A

HEATING / AIR CONDITIONING  BLOWER UNIT  REASSEMBLY  


PROCEDURE

Hide 87139C 1.INSTALL CLEAN AIR FILTER

a.
I106214

Install the clean air filter into the blower.

NOTICE:

Install the clean air filter with its UP marks oriented in the correct direction.



Hide 88548B 2.INSTALL AIR FILTER CASE

a.
I106215E02
2.729,1.583 2.875,1.76 0.146,0.177 10 true A 2.729,0.719 2.875,0.896 0.146,0.177 10 true A

Insert the rib of the air filter case into the blower unit.

NOTICE:

Install the air filter case with its UP mark oriented in the correct direction.



b.

Pinch portion A to engage the claw and install the air filter case.


Hide 87138C 3.INSTALL BLOWER RESISTOR (for Manual Air Conditioning System)

a.
I101599

Install the blower resistor with the 2 screws.


Hide 87165C 4.INSTALL BLOWER MOTOR CONTROL (for LHD Automatic Air Conditioning System)

a.
I106872

Install the blower motor control with the 2 screws.


Hide 87103B 5.INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY

a.
I101208

Install the blower motor with the 3 screws.


Hide 88648P 6.INSTALL NO. 1 AIR CONDITIONING WIRE (for LHD Automatic Air Conditioning System)

a.
I106871

Engage the 3 clamps and install the air conditioning wire.


b.

Connect the connector.


Hide 87130K 7.INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)

a.
I100751

Install the blower damper servo with the 2 screws.


Hide 55908A 8.INSTALL AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)

a.
I106729

Engage the 3 claws and install the air inlet damper control cable.


Hide 87201 9.INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY

a.
I106209

Engage the 2 claws and 2 guides, and install the air duct.