Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1NZ-FE, 2NZ-FE)
RM19S0E _58 Vehicle Interior _051498 HEATING / AIR CONDITIONING _0248359 COMPRESSOR(for 1NZ-FE, 2NZ-FE) G

HEATING / AIR CONDITIONING  COMPRESSOR(for 1NZ-FE, 2NZ-FE)  INSPECTION  


PROCEDURE

Hide 88310 1.INSPECT COMPRESSOR WITH PULLEY ASSEMBLY

a.
I105051E04
0.16,0.115 0.341,0.289 0.181,0.173 10 *a 0.805,1.71 1.187,1.883 0.382,0.173 10 SOL+ 2.216,1.71 2.598,1.883 0.382,0.173 10 SOL- 1.963,1.25 2.388,1.676 false 1.493,1.25 1.067,1.676 false

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Compressor With Pulley Assembly)

Standard Resistance:
Tester Connection Condition Specified Condition
2 (SOL+) - 1 (SOL-) 20°C (68°F) 10 to 11 Ω


If the result is not as specified, replace the compressor with pulley assembly.