Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1NZ-FE, 2NZ-FE)
RM19S0E _58 Vehicle Interior _051498 HEATING / AIR CONDITIONING _0248359 COMPRESSOR(for 1NZ-FE, 2NZ-FE) G

HEATING / AIR CONDITIONING  COMPRESSOR(for 1NZ-FE, 2NZ-FE)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 88310 1.INSPECT COMPRESSOR FOR METALLIC SOUND

a.

Check if there are any abnormal metallic sounds from the compressor when the A/C switch is on and the compressor operates.

If any abnormal metallic sound is heard, replace the compressor.


Hide 3.INSPECT FOR LEAKAGE OF REFRIGERANT

a.

Using a halogen leak detector, check for leakage of refrigerant.

If there is any leakage, replace the compressor.


Hide 88310 4.INSPECT COMPRESSOR WITH PULLEY ASSEMBLY

a.

Check operation of compressor with pulley assembly.

i.

Start the engine.


ii.

Inspect the compressor with pulley assembly.

E218245E01
0.205,0.83 0.422,1.008 0.217,0.178 10 *1 3.648,0.762 3.865,0.940 0.217,0.178 10 *1 0.351,0.936 0.734,1.537 false 3.826,0.873 4.186,1.234 false

Text in Illustration
*1 Pulley - -

OK:

The compressor shaft rotates along with the pulley.


If the result is not as specified, replace the compressor with pulley assembly.