Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER
RM19S0E _58 Vehicle Interior _051498 HEATING / AIR CONDITIONING _0248360 CONDENSER A

HEATING / AIR CONDITIONING  CONDENSER  REASSEMBLY  


PROCEDURE

Hide 88474 1.INSTALL COOLER DRYER

a.
I104987

Using pliers, install the cooler dryer onto the modulator.


b.
E101932

Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.


c.
I104986E05
0.495,1.182 0.700,1.366 0.206,0.185 10 *1 1.166,1.508 0.669,1.277 false 0.42,1.566 0.626,1.750 0.206,0.185 10 *2 1.092,1.892 0.595,1.661 false

Using a 14 mm straight hexagon wrench, install the cap onto the modulator.

Text in Illustration
*1 14 mm Straight Hexagon Wrench
*2 Modulator

Torque:
2.9 N*m (30 kgf*cm, 26 in.*lbf)