Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PRESSURE SENSOR
RM19S0E _58 Vehicle Interior _051498 HEATING / AIR CONDITIONING _0248365 AIR CONDITIONING PRESSURE SENSOR A

HEATING / AIR CONDITIONING  AIR CONDITIONING PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 88719A 1.INSTALL AIR CONDITIONER PRESSURE SENSOR

a.

Remove the attached vinyl tape from the tube and the connecting part of the cooler condenser.


b.

Apply sufficient compressor oil to a new O-ring and the fitting surface of the tube joint.

Compressor oil:

ND-OIL8 or equivalent.



c.
I106308E01
0.582,2.52 0.808,2.724 0.226,0.204 10 *a 2.811,0.231 3.036,0.436 0.226,0.204 10 *b

Using a deep socket wrench 27 mm, install the pressure sensor.

Text in Illustration
*a Turn
*b Hold

Torque:
11 N*m (110 kgf*cm, 8 ft.*lbf)


d.

Connect the connector.