55901D
1.REMOVE NO. 1 HEATER CONTROL SUB-ASSEMBLY
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to remove the No. 1 heater control sub-assembly.
| *a | Protective Tape |
Remove the bulb.
55902E
2.REMOVE NO. 2 HEATER CONTROL SUB-ASSEMBLY
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to remove the No. 2 heater control sub-assembly.
| *a | Protective Tape |
Remove the bulb.
55903A
3.REMOVE NO. 3 HEATER CONTROL SUB-ASSEMBLY
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws to remove the No. 3 heater control sub-assembly.
| *a | Protective Tape |
Remove the bulb.
86250
4.REMOVE AMPLIFIER MICROPHONE ASSEMBLY (w/ Microphone)