Home › Vehicle Interior › HEATING / AIR CONDITIONING › RELAY
RM19S0E _58 Vehicle Interior _051498 HEATING / AIR CONDITIONING _0248369 RELAY G

HEATING / AIR CONDITIONING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85910C 1.INSPECT HEATER BLOWER MOTOR RELAY ASSEMBLY

a.
E223161

Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Battery voltage not applied Below 1 Ω
3 - 4 Battery voltage applied to terminals 1 and 2 10 kΩ or higher
3 - 5 Battery voltage not applied 10 kΩ or higher
3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the heater blower motor relay.