Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING(for 5 Door) › 2014.07–2017.01
RM19S0E _58 Vehicle Interior _051500 INTERIOR PANELS / TRIM _0248378 ROOF HEADLINING(for 5 Door) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for 5 Door)  REASSEMBLY  


PROCEDURE

Hide 82171 1.INSTALL NO. 1 ROOF WIRE

a.

Align the No. 1 roof wire positioning tape with the markings of the roof headlining.

B384979E02
1.271,0.583 0.927,0.51 false 1.677,1.156 1.531,1.406 false 1.729,1.969 1.49,1.927 false 0.729,0.406 0.906,0.563 0.177,0.156 10 false *a 1.688,1.042 1.865,1.198 0.177,0.156 10 false *b 1.76,1.927 1.938,2.083 0.177,0.156 10 false *c

Text in Illustration
*a Tape *b Positioning Tape
*c Marking - -


b.

Install the No. 1 roof wire onto the roof headlining with 10 new pieces of tape.

NOTICE:
·

Apply the tape securely in place.

·

Do not touch the adhesive surface when applying the tape to prevent adhesion failure.




Hide 66414A 2.INSTALL REAR SIDE RAIL SPACER RH

a.
B272638

Align the markings on the roof headlining assembly with the rear side rail spacer RH to install the rail spacer using hot melt glue.

Text in Illustration
V100155

Adhesive Portion


Hide 66424 3.INSTALL REAR SIDE RAIL SPACER LH

HINT:

Use the same procedure as for the RH side.


Hide 63343B 4.INSTALL REAR ROOF SILENCER PAD

a.
B378998

Align the markings on the roof headlining assembly with the 3 rear roof silencer pads to install the silencer pads using hot melt glue.


Hide 63345 5.INSTALL NO. 5 ROOF SILENCER PAD

a.
B272635

Align the markings on the roof headlining assembly with the 2 No. 5 roof silencer pads to install the silencer pads using hot melt glue.


Hide 63341G 6.INSTALL ROOF SILENCER PAD

a.

Align the markings on the roof headlining assembly with the 2 roof silencer pads to install the silencer pads using hot melt glue.

B378999E01
1.201,0.246 1.371,0.406 0.170,0.161 10 *a 1.547,1.203 1.717,1.364 0.170,0.161 10 *1 1.152,0.735 1.646,0.896 0.494,0.161 10 12 mm 2.395,0.235 3.168,0.396 0.774,0.161 10 33.4 mm 1.355,0.323 1.567,0.349 false 1.698,1.268 1.981,1.23 false

Text in Illustration
*1 Marking - -
*a Roof Silencer Pad - -


Hide 63341 7.INSTALL NO. 1 ROOF SILENCER PAD

a.

Align the markings on the roof headlining assembly with the 4 No. 1 roof silencer pads to install the silencer pads using hot melt glue.

B379846E01
5.325,0.226 6.030,0.673 0.705,0.447 10 33.4 mm 6.612,0.737 7.063,1.185 0.451,0.447 10 12 mm 6.818,0.29 7.056,0.496 0.238,0.206 10 *a 6.642,0.235 6.802,0.307 false 6.407,1.145 6.645,1.351 0.238,0.206 10 *1 6.231,1.09 6.391,1.161 false

Text in Illustration
*1 Roof Silencer Pad - -
*a Marking - -


Hide 86101J 8.INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

Hide 73373 9.INSTALL REAR SEAT SHOULDER BELT COVER

a.
B284332

Engage the 6 claws and 2 guides to install the rear seat shoulder belt cover.