Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER WIRE
RM19S0E _59 Vehicle Exterior _051501 WINDOW / GLASS _0248386 WINDOW DEFOGGER WIRE A

WINDOW / GLASS  WINDOW DEFOGGER WIRE  REPAIR  


PROCEDURE

Hide 68131 1. IF NECESSARY, REPAIR DEFOGGER WIRE

a.
B106758E33
2.844,0.885 2.844,1.406 false 1.698,0.74 1.333,0.292 false 0.979,1 0.542,1.396 false 1.177,0.094 1.365,0.292 0.188,0.198 10 false *a 0.333,1.417 0.521,1.615 0.188,0.198 10 false *1 2.771,1.417 2.948,1.615 0.177,0.198 10 false *b

Clean the broken wire tips with grease, wax and silicone remover.

Text in Illustration
*1 Masking Tape
*a Repair Point
*b Broken Wire


b.

Place masking tape along both sides of the wire.


c.
B106759

Thoroughly stir the repair agent (DuPont paste No. 4817 or the equivalent).


d.

Using a fine tip brush, apply a small amount of the agent to the wire.


e.

After a few minutes, remove the masking tape.

NOTICE:

Do not repair the defogger wire again for at least 24 hours.