Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR OPENER SWITCH
RM19S0E _59 Vehicle Exterior _051502 DOOR / HATCH _0248395 BACK DOOR OPENER SWITCH G

DOOR / HATCH  BACK DOOR OPENER SWITCH  INSPECTION  


PROCEDURE

Hide 84840G 1.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY

a.
B142645E06
0.18,0.119 0.369,0.305 0.188,0.186 10 *a 1.087,1.803 1.327,1.989 0.240,0.186 10 UL 1.964,1.803 2.100,1.989 0.136,0.186 10 E 1.495,1.371 1.255,1.786 false 1.727,1.371 1.968,1.786 false

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Back Door Opener Switch assembly)

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (E) - 3 (UL) Open switch pushed Below 1 Ω
Open switch not pushed 10 kΩ or higher


If the result is not as specified, replace the back door opener switch assembly.