Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM19S0E _59 Vehicle Exterior _051502 DOOR / HATCH _0248396 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 68960 1.REMOVE BACK DOOR STAY ASSEMBLY

a.
B271656E01
0.897,0.9 1.054,1.052 0.157,0.152 10 *1 0.49,0.707 0.855,0.971 false

Using a screwdriver with its tip wrapped in protective tape, slightly raise the 2 stop rings, as shown in the illustration.

Text in Illustration
*1 Protective Tape

NOTICE:
·

Do not touch the rod of the stay with gloves, to prevent fibers from adhering.

·

When foreign matter adheres to the rod, it prevents the rod from moving smoothly and reduces its holding power.




b.

Disengage the 2 ball joints and remove the back door stay.

NOTICE:
·

Do not remove the stop rings from the stay. Raise the stop rings just enough to allow the stay to be disengaged.

·

Do not reuse a stop ring if it is removed from the stay.




Hide 68946 2.REMOVE BACK DOOR DAMPER STAY UPPER BRACKET

a.
B271657

Remove the 2 bolts and the back door damper stay upper bracket.


Hide 68948 3.REMOVE BACK DOOR DAMPER STAY LOWER BRACKET

a.
B271658

Remove the 2 bolts and the back door damper stay lower bracket.