87940
1.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Power Mirror Control System)
Check the outer rear view mirror operation.
| *a | Component without harness connected
(Outer Rear View Mirror Assembly LH) |
Apply battery voltage and check the operation of the outer rear view mirror.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 5 (MV)
Battery negative (-) → Terminal 4 (M+) |
Turns upward |
| Battery positive (+) → Terminal 4 (M+)
Battery negative (-) → Terminal 5 (MV) |
Turns downward |
| Battery positive (+) → Terminal 3 (MH)
Battery negative (-) → Terminal 4 (M+) |
Turns left |
| Battery positive (+) → Terminal 4 (M+)
Battery negative (-) → Terminal 3 (MH) |
Turns right |
If the result is not as specified, replace the outer rear view mirror assembly.
87910
2.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Power Mirror Control System)
Check the outer rear view mirror operation.
| *a | Component without harness connected
(Outer Rear View Mirror Assembly RH) |
Apply battery voltage and check the operation of the outer rear view mirror.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 5 (MV)
Battery negative (-) → Terminal 4 (M+) |
Turns upward |
| Battery positive (+) → Terminal 4 (M+)
Battery negative (-) → Terminal 5 (MV) |
Turns downward |
| Battery positive (+) → Terminal 3 (MH)
Battery negative (-) → Terminal 4 (M+) |
Turns left |
| Battery positive (+) → Terminal 4 (M+)
Battery negative (-) → Terminal 3 (MH) |
Turns right |
If the result is not as specified, replace the outer rear view mirror assembly.