Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER MOTOR
RM19S0E _59 Vehicle Exterior _051504 WIPER / WASHER _0248405 FRONT WIPER MOTOR G

WIPER / WASHER  FRONT WIPER MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85110 1.INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY

a.

Check the automatic stop position.

i.
E229455E05
2.115,2.479 1.677,2.813 false 2.125,2.375 2.281,2.531 0.156,0.156 10 false *a 0.594,2.542 1.042,2.698 0.448,0.156 10 false 10 mm 0.573,2.833 1.021,2.99 0.448,0.156 10 false 10 mm

Operate the windshield wiper motor assembly.

Text in Illustration
*a Mark for Blade Position


ii.

Stop the windshield wiper motor assembly operation.


iii.

Check the automatic stop position of the front wiper arm and blade.

OK:

The front wiper arm and blade stops at the position as shown in the illustration.


NOTICE:

There are 2 marks, so make sure to inspect using the correct mark.